ConcreteRenewal's mission is to provide the most value based garage floor coating available. Colored Quartz quickly became our choice as durability could not be matched by resin only epoxy, urethane or polyaspartic products. The look of a Quartz-Based flooring is a measurable upgrade and the surface texture provided traction where others are slippery when wet or if sand/grit is present.
1-SET-UP AND CLIMATE CONTROL
Temperatures, Humidity and Dew Point have a significant affect on the ability of any coating to bond to the surface. Our Climate Control Trailer lets us stabilize air and surface temperatures, reduce humidity, dry out wet concrete, and eliminate problems with improper dew points. We install year round and we NEVER worry about cold, rain or snow. Also dust, sand and other contaminants are prevented from being blown onto the surface.
Surface preparation is the single most important factor in determining long term bonding performance of a concrete coating. At ConcreteRenewal Services we cut no corners. We have invested in the proper equipment to do all jobs right, the first time. To prepare a surface for any coating we literally remove the top layer 1/8th inch of concrete. This process removes contaminants and lets us apply our coating to a fresh clean surface.
With any coating, the bonding strength is dependent on an open, properly profiled surface. We achieve an open surface by removing the top layer (laitance) of concrete exposing the natural porosity of concrete and achieve the proper profile (surface texture) with our grinding machines...
4-PRODUCT APPLICATION - BASE COAT
Measurements are double checked as we need an exact square footage to mix the proper amount of resin. Mixed in 3 gallon batches, we mix and spread several batches to cover the floor. Spreading out the mixed resin and finishing with backrolling it in order to make sure it is even and consistent.
5-PRODUCT APPLICATION QUARTZ AGGREGATE
Unique to our application is the way we broadcast the quartz aggregate into the base layer of resin. While the resin is still in it's liquid state, we walk on the surface with spiked shoes as we start our quartz blowing machine. This machine will broadcast 700-800 pounds of quartz into the resin in a very consistant way. This control is the key to a consistant finish when the top coat gets applied.
5-PRODUCT APPLICATION TOP COAT
We combine one of natures hardest minerals (quartz) with high quality resins selected to work in this environment. As an independent contractor, our flexibility to select product is not restricted. We have partnered with SIKA© Manufacturing to supply us with our product. SIKA© is the largest industrial floor coating resin manufacturer in the world providing unmatched product, unlimited selection and exceptional support.
2-SIDE BY SIDE COMPARISON WITH OTHER SYSTEMS
As illustrated our coating is significantly thicker than the "Paint-On" products. This difference, along with quartz, results in a surface you can't wear through. The facts are "Paint-On" coatings are rarely thicker than a few sheets of paper or a business card.. Now combine the fact that you'll be driving a several thousand pound vehicle onto the surface, "Paint-On" coatings start to show their weakness.
In our climate, surface profile (texture) is a significant factor in what type of coating that should be installed. Floors are subject to water, snow and winters slop that gets brought into your garage for a significant percentage of the year.